Dating fender amps transformer

Includes 4 bolts and 4 matching nuts with integral lock washers. Pack of 6 stainless steel back panel screws for Fender original and reissue "Tweed" series amps. Mounts the chassis to the cabinet on top as well as the sides of the cabinet. Mounts the chassis to the cabinet on top as well as the sides of the cabinet. Set of 4 screws, stainless steel, 1 1/4 inches long, Phillips, oval head.

Fits the Fender Hot Rod Deluxe, Hot Rod Deville, Blues Deluxe, Blues Junior and Blues Deville, 59 Bassman reissue, as well as the original Tweed amps from the 1950s: Tweed Vibrolux, Tweed Twin, Tweed Tremolux, Tweed Super, Tweed Pro, Tweed Princeton, Tweed Harvard, Tweed Deluxe, Tweed Champ, and Tweed Bassman. Fits the Fender Hot Rod Deluxe, Hot Rod Deville, Blues Deluxe, Blues Junior, Pro Junior, and Blues Deville, 59 Bassman reissue. Fits the Fender original Tweed amps from the 1950s: Tweed Vibrolux, Tweed Twin, Tweed Tremolux, Tweed Super, Tweed Pro, Tweed Princeton, Tweed Harvard, Tweed Deluxe, Tweed Champ, and Tweed Bassman. This set of four screws fits either the top or bottom rear panels on Fender combo amps from the 60s and 70s, and todays reissues of those BF and SF amps. BACK PANEL STAINLESS STEEL SCREWS (SET OF 8) FOR OPEN BACK CABINETS (such as Fender Blonde, Brown, Blackface and Silverface Series).

Fender Vintage Amp (60s Blackface and 70s Silverface) Power Tube Socket replacement kit. ) from the original blackface and silverface eras which have four power tubes (6L6). The kits are assembled from premium capacitors made by F&T of Germany (filter capacitors) and Illinois Capacitor (cathode bypass capacitors).

dating fender amps transformer-89

This set of four screws fits either the top or bottom rear panels on Fender combo amps from the 60s and 70s, and todays reissues of those BF and SF May be used with the BCW-10 cup washers.

See data sheet BACK PANEL STAINLESS STEEL SCREWS (SET OF 8) FOR OPEN BACK CABINETS (such as Fender Blonde, Brown, Blackface and Silverface Series).

By cleaning the remainder of the broken keyway from the tube base and properly installing this keyway replacement (a little dab of silicone sealant works great to hold it in place), your tube can safely be reinstalled into your equipment. Note: when using an adhesive to secure the keyway to the tube base, DO NOT use a water-based glue. Values available include 10u F/500V, 16u F/475V, 22u F/500V, 47u F/500V, 80u F/450V, 100u F/100V, 100u F/450V, and 220u F/300V. Ruby Gold Capacitors are rated at 105 C for longer life, improved stability in the hot environment of tube amplifiers, and increased protection against electrolyte deterioration. Chrome metal caps - replacement for vintage and reissue Fender amps. Has slight "raised" bump near the center of the handle. 6.5 inches from mounting center to mounting center. HANDLE MOUNTING KIT - FOR STRAP HANDLES Complete set of hardware for mounting one leather style strap handle, including machine screws and T-Nuts.

Silicone sealant (RTV) which is acryllic-based or butyl-based is fine. EXACT REPLACEMENT FOR VINTAGE FENDER, VINTAGE Marshall (including the JCM900 Series), and many others. Ruby Gold capacitors are used by many original amplifier manufactures in the Europe and the U. Ideal as replacement in vintage audio and guitar amplifiers. Comes complete with two nickel-plated handle mounts and four screws. Excellent for repairing strap handles where the old wood screws have pulled out of their holes. Looks similar to the original Fender part number 0990947000. Black handle strap, metal reinforced, with chrome end caps - two screws in each end cap. See Data Sheet here The result is a T-nut that goes in straighter and holds tighter than ordinary T-nuts.

Values available include 4.7u F/50V, 10u F/500V, 22u F/50V, 22u F/500V, 47u F/500V, 80u F/450V, 100u F/100V, 100uf/350V, 220u F/16V, and 220u F/300V. Replacement for Fender Princeton and Princeton Reverb main filter capacitor on blackface and silverface amps from the 1960s and 1970s. Rated 85 degrees C, -10%/ 50% tolerance, 1-3/8" diameter x 3-1/2" number 125C3A & 022707. Vacuum impregnated with polyurethane varnish for quiet and long life operation. Typically found on the back panel of some Fender Blonde/Brown era amps, and some Blackface vintage amps. Larger than the CW-401-4 - Fender was not consistent in which washers they used on back panels over the years. Larger than the CW-401-4 / CW-401-8 sets - Fender was not consistent in which washers they used on back panels over the years. Ground Connection Terminals - Flat Used to connect a ground wire to a screw and nut on a chassis. With built-in lock washer to keep the screw and nut from loosening. DSP, Acoustasonic 30, Acoustasonic SFX II, Bassman 25, Bassman 60, Jazzmaster Ultralight Enclosure, Princeton 650, Cyber Champ, Rumble 112, Rumble 2x8, Super-Sonic 100 Head, Super-Sonic Twin, Super Champ X2/XD, and Bullet 15 DSP amplifier. Original Fender part number 0994093000Fender AMP LOGO.

Also may be used for Fender Champ, Vibro-Champ and Bronco amps from the same era (one extra 20u F section unused on these amps). For dimensions and technical specifications, click number 125C1A & 022699. Vacuum impregnated with polyurethane varnish for quiet and long life operation. OUTSIDE EDGE OF WASHER IS BARELY LARGER THAN THE HEAD OF THE Fender BACK PANEL SCREWS. New original Fender reproduction, for the CBS era (1970s).

CAPACITOR, ILLINOIS CAPACITOR BRAND, AXIAL LEAD ELECTROLYTIC, VARIOUS VALUES AND VOLTAGES AVAILABLE (SEE OPTIONS) Illinois Capacitor Company was founded in 1934 in Chicago, IL, and over 80 years later continues to produce benchmark quality capacitors for industry. Perfect for amplifier circuit additions or modifications. Each lug will accept wires up to 16ga - smaller gauge allows multiple wires to be connected to each lug. Introduced on Blonde, Brown, and Blackface-era Fender amplifiers. Introduced on some Blonde and Brownface-era Fender amplifiers. High quality black EXTRA-THICK leather handle for vintage Fender and Ampeg amps. New original Fender reproduction, for the blackface era (1960s). Fender logo with "tail", cast metal, mounting screws included.

Illinois Capacitor is now a subsidiary of Cornell Dubilier, another American capacitor manufacturer tracing its roots to 1909. Replacement for Fender main filter capacitor on Princeton Reverb II, Deluxe Reverb II, and Champ II from the 1980s. OUTSIDE EDGE OF WASHER IS BARELY LARGER THAN THE HEAD OF THE Fender BACK PANEL SCREWS. OD 7/16", ID 3/16" Typically found on the back panel of some Fender Blackface/Silverface vintage amps and the reissues of those amps. OD 7/16", ID 3/16" Typically found on the back panel of some Fender Blackface/Silverface vintage amps and the reissues of those amps. End terminals on each strip are the mounting lugs, so they become a ground lug if attached to a metal chassis. Used on '65 Twin Reverb, '65 Deluxe Reverb, '65 Super Reverb, '65 Princeton Reverb, '64 Vibroverb Custom, Custom Vibrolux, Vibro-King 212 Enclosure, Blues Junior, Pro Junior, Acoustasonic Jr. Note: This handle is quite thick - 0.4 inches thick (about 3/8", or 10mm). Used on the upper left corner of the grill cloth on most blackface era Fender amps. 4 1/2" wide, the "F" in the logo is about 2 1/2" inches tall.

This is a great kit to replaced all 6 of the tube shields in many Fender amps with 6 preamp tubes. Use two (or three) of these rings around a pre-amp tube to reduce noise and microphonics.

If you have a cherished octal power tube or rectifier with a broken keyway, here is a great solution. STYLE MICALEX TUBE SOCKET FOR MINIATURE 9-PIN TUBES. F&T Caps are known for their great stability and reliability. Looks similar to the original Fender part number 0990947000. (reddish-brown) handle strap, made of genuine leather, replacement for Fender "tweed" style amps (as well as other vintage amps).

Fender Nickel Chassis Straps - Nickel-Plated - Large (5") for Twin, Bassman, Super, Showman, Vibro-King, Pro, Pro Reverb, Prosonic, etc. Screw spacing is 5 inches center-to-center, strap length is 5 5/8" end-to-end. Fender Nickel Chassis Straps - Black - Large (5") for Twin, Bassman, Super, Showman, Vibro-King, Pro, Pro Reverb, Prosonic, etc. Screw spacing is 5 inches center-to-center, strap length is 5 5/8" end-to-end. Fender Nickel Chassis Straps w/ hardware - Medium (4") For Deluxe, Vibrolux, etc. Fender Nickel Chassis Straps with hardware - Medium (4") for later silverface versions of the medium-size Fender Amps: Deluxe Reverb, Vibrolux Reverb, etc. Bolts screw into a captive nut on the top rail of the chassis, so there are no bottom nuts on these models.

Tags: , ,